Rosettes Chrome Caps with toggle bolts, Set of 4

$62.75
SKU
A4070

Polished chrome rosettes screw into the tapped-head toggle bolts for sleek, secure application.
Use the toggle bolts to mount mirrors on hollow wallboard, concrete, wood or steel walls up to 2-1/2" (64 mm) thick. Click on Details tab for how to use.

Set includes
  • 4 curved chrome caps rosettes - 3/4" diameter with 1/4" long 3-48 threaded shanks
  • 4 tapped head steel toggle bolts 3" long with an 8-32 thread. The slotted countersunk screw head is tapped for the rosettes. The bolt is threaded along its entire length. You can cut it to the length you need for your installation.
  • 4 black felt pads - 5/8" diameter
  • 4 black vinyl sleeves - 1/4" x 1/4"
How To Use:
  1. Drill 1/2" holes in the wall for the toggle bolts.
  2. Drill 1/4" holes in the mirror.
  3. Place a vinyl sleeve on each toggle bolt.
  4. Thread the bolts through the holes in the mirror.
  5. Screw a butterfly nut onto each bolt behind the mirror.
  6. Insert the bolts through the holes in the wall.
  7. Carefully tighten the bolts to hold the mirror to the wall.
  8. Place a black felt washer over the shank of each rosette.
  9. Screw the rosettes into the tapped heads of the toggle bolts.
Customer Questions
No Questions
Did you find what you were looking for?
 
Rosettes Chrome Caps with toggle bolts, Set of 4