Toll free: 1-866-341-3340
International: 1-708-383-3340

Sensitizer for 2-Part Silver Zoom

Sensitizer for 2-Part Silver

Product Name Price Qty
Sensitizer for 2-Part Silver, 30 mL
 - SKU: 2065 - approx. coverage 250 square feet
$10.85
Sensitizer for 2-Part Silver, 125 mL
 - SKU: 2066 - approx. coverage 1,042 square feet
$36.20
Sensitizer for 2-Part Silver, 500 mL
 - SKU: 2068 - approx. coverage 4,167 square feet
$97.50
Product Description

    Details

    Sensitizer for 2-Part Silver creates an invisible chemical bond between the silver and the glass. This bond causes the silver to deposit evenly and stick to the surface. You must sensitize the surface before silvering.

    Measuring

    This is a very concentrated product so we include a 1 ml syringe for measuring with every bottle we send out. When the syringe is full to the top, it contains 1 ml of Sensitizer. The syringe is marked in units of 1/10th of a milliliter. If you fill it to the top, you would add that amount of Sensitizer to 500 ml of distilled water. If you fill it to the 0.1 mark, you would add that amount of Sensitizer to 50 ml of distilled water.

    Product Details

    Dilute Mix Sensitizer for 2-Part Silver with distilled or de-ionized water before using
    Mix Add 1 ml of concentrate to 500 ml of distilled water
    Coverage Use about 60 ml (2 fl oz) of diluted Sensitizer per square foot
    Time Leave on the glass for 30 seconds then rinse off completely.
    Shelf Life - concentrate 1 year if stored in a cool location. May be frozen for longer storage. Thaw at room temperature. Do not heat.
    Shelf Life - dilute 6 – 8 hours. Make fresh daily
    Use With Any of our spraying or pouring silvering chemicals.
    Note Sensitizer for 2-Part Silver can develop a white sediment over time. This does not interfere with its functioning. Do not shake the bottle. The sediment will not re-dissolve. Shaking adds air which shortens the shelf life.
Eligible For Educational Discount

You may also be interested in the following product(s)