Sensitizer for 2-Part Silver
SKU
Sensitizer-for-2-Part-Silver-G
Sensitizer for 2-Part Silver creates an invisible chemical bond between the silver and the glass. This bond causes the silver to deposit evenly and adhere to the surface. You must sensitize the surface before silvering.
Measuring
This is a concentrated product so we include a 1 ml syringe for measuring. When the syringe is full, it contains 1 ml of Sensitizer. The syringe is marked in units of 1/10th of a milliliter. If you fill it to the top, you would add that amount of Sensitizer to 500 ml of distilled water. If you fill it to the 0.1 mark, you would add that amount of Sensitizer to 50 ml of distilled water.Storing
Put the cap back on the syringe after every use and store the capped syringe in its reclosable plastic bag to keep it clean. Freezing Sensitizer for 2-Part Silver shortens its shelf life. We recommend refrigeration.
Click on the Details tab for more information.
Volume Converter
Product Data
Mix | Add 1 ml of concentrate to 500 ml of distilled or de-ionized water |
---|---|
Coverage | Use about 60 ml (2 fl oz) of diluted Sensitizer per square foot |
Time | Leave on the glass for 30 seconds then rinse off completely. |
Shelf Life - concentrate* | 1 year if stored in a cool location. Do not freeze. |
Shelf Life - dilute | 6 – 8 hours. Make fresh daily |
Use With | Pouring Silver Ready-To-Use Pouring Silver Concentrate 3-Part Spray Silver Concentrate 2-Part Spray Silver Concentrate. |
Shipping Restrictions | None |
*Shelf Life Note | Sensitizer for 2-Part Silver can develop a white sediment over time. This does not interfere with its functioning. Do not shake the bottle. The sediment will not re-dissolve. Shaking adds air which shortens the shelf life. If the liquid looks yellow, it has expired. |
Safety Data Sheet
- Sensitizer for 2-Part Silver - C3031
Customer Questions
Check items to add to the cart or